Wireless Controller
Wireless ZHAGA Controller with LED driver and communicate with LCU by Solar(4G/LTE)
BOSUN-LC-4G/S(ZHAGA)
The solar internet of Thinas module is a communication module that can adant to the solar street amn controller This modulhas 4G Cat.1 communication function.which can be remotely connected to the server in the cloud, At the same time. the module has RS485 /TTL communication interface, which can complete the sending and reading of the parameters and status of the solar controller.
Quantity

  

Mainper for mance characteristics of the controller:

The solar internet of Thinas module is a communication module that can adant to the solar street amn controller This modulhas 4G Cat.1 communication function.which can be remotely connected to the server in the cloud,At the same time. the module has RS485 /TTL communication interface, which can complete the sending and reading of the parameters and status of the solar  controller. 

 

Mainper for mance characteristics of the controller:

·Fault alarm, battery / solar boardload fault alarm
·Can remote switch laad, adjust the power of the load
·Cat1 Wireless communication
·Support remote upgrade firmware
·Two types of voltage input of 12V/24V
·Remote the parameters of multiple or single or single controller
·Read the voltage/current/pawer of the battery / oad / sun glasses inside the controller
·Remote control and information reading of the computer interface andmobile phone WeChat mini -program

  
 
 
4G/LTE Solar Lamp Controller
PATENT Pro-Double MPPT Solar charge controller
Combining 4G/LTE Solar Lamp Controller communication technology, lithium battery charging function and boost constant current into one,integrates PATENT Pro-Double MPPT Solar charge controller (Maximum Power Point Tracking) charging
Pilot lampStatusFunction
AC InputVery slow (On 0.3s, Off 5s)No SIM card detected
Slow (On 0.3s, Off 2s)Normal, powering up
Intermediate (On 0.3s, Off 1s)Connecting to the network
Fast (On 0.1s, Off 0.1s)Network connected
 
ModelBOSUN-LC-4G/S
Supply voltage3.2V / 12V / 24V
Communication mode4G
Operation temperature-45°C-65°C
IP codeIP67
 
 
Connection mode
For safety, connect cables according to the sequence of connecting loads, batteries, and photocells.
The antenna should avoid direct contact with metal(includingshielded functional items) and cannot be placed in a completelyclosed iron container. In addition, the installation should be fixedfirmly, and avoid scratches and insulation damage to the line.
(A)Connection load
At this time, the controller has not started to work, and the controller has no responseafter the connection is completed.
(B) Connect the optical panel
The controller can be used for 18V or 36V standard solar modules, and can also beused for solar modules whose open circuit voltage does not exceed the specifiedmaximum input voltage. The maximum power point voltage of the solar module shouldnot be lower than the battery voltage.
(C)Connect the four-core wires of the controller to the four-core wires of the module.Observe the indicator on the module. Quick flash for online.
(D)Connect the antenna: Fix the antenna on the housing and connect the appliance through the antennaextension cable